Course providers in Australian Capital Territory
Become a licensed carpenter with the CPC30220 Certificate III in Carpentry. This nationally recognised training course is a trade qualification and part of a carpentry apprenticeship. During your studies you will learn the essentials of working on a construction worksite including critical safety, communication, and behavioural standards. You’ll then gain the technical skills you need to work in either commercial carpentry, residential carpentry, or formwork. Skills include: using carpentry tools and equipment, handling carpentry materials, setting out, installing floors, constructing wall frames, erecting roof trusses and pitched roofs, installing windows and much more. Enquire now for the list of study units, carpentry career outcomes, and upcoming enrolment dates.
Learn moreThe BSB30719 - Certificate III in Work Health and Safety is a Nationally Recognised Training (NRT) qualification. Please make an enquiry to find out more about the course such as government funding options, study modes and duration.
Learn moreBecome a licensed rigger and dogger with the CPC30720 Certificate III in Rigging. This nationally recognised qualification prepares you for work at heights on construction sites in Australia. During your studies you’ll learn the essential safety and communication protocols at construction sites and gain a range of accredited work permits. Technical skills include: carrying out measurements and communications, reading and interpreting plans and specifications, operating booms and work platforms, erecting and dismantling scaffolding, using dogging tools and equipment, operating various work vehicles, and much more. Enquire now for the full list of study units, licensing outcomes, and upcoming enrolment dates.
Learn moreIf you missed a lot of school or have a learning disability, the FSK10119 Certificate I in Access to Vocational Pathways will get you ready to tackle a full VET qualification. Over 6 months of guided study you will be introduced to fundamental maths calculations and measurements, then learn how to apply them in a typical workplace. The course also covers: transactions with money, basic data and table preparation, using digital technologies, verbal communication and basic reading skills. Enquire now for the list of study units, graduation outcomes, and enrolment dates.
Learn moreThe CPC20220 Certificate II in Construction Pathways prepares you for work in the construction industry and gives you head start if you want to find a trade apprenticeship. You’ll learn how to read and interpret plans, take accurate measurements, and work safely on a building site — then choose electives that support a career in bricklaying, carpentry, joinery, plastering, tiling, or stonemasonry. Enquire now for the list of speciality areas and enrolment opportunities near you.
Learn moreEnrol in the FBP20122 Certificate II in Food Processing course to become a food process worker. This course is applicable for a range of industries from grain, dairy and poultry processing to fruit and vegetable supply, grocery orders and beverages, confectionery and baking. You’ll learn the skills to prepare, handle and transport food in your preferred industry. The FBP20122 Certificate II in Food Processing covers a range of subjects affecting the food processing industry. Course delivery will vary depending on your provider, but you might cover topics including vacuum packing products, sharpening knives and using business technology. Enquire now for a full list of study units, entry requirements and start dates.
Learn moreThe HLTWHS005 Conduct Manual Tasks Safely provides the skills and knowledge necessary for employees to perform safe handling practices in the healthcare industry. Poor manual handling is a common cause of injury, making it crucial for all healthcare workers to learn safe transfer techniques. This course covers recognising hazardous manual tasks, preparing for them, and completing them safely. It is applicable to all workers involved in manual handling tasks. Enquire now for a full list of entry requirements and available enrolment dates.
Learn moreThe Certificate II in Engineering MEM20105 is ideal for trade apprentices and metal engineering process workers needing hands-on skills in metal arc welding, tungsten arc welding, and manual heating/thermal cutting. The course also teaches students how to perform computations and engineering measurements. Enquire today to check your eligibility requirements and for funding opportunities.
Learn moreGet your mobile crane licence with the nationally recognised TLI30122 Certificate III in Mobile Crane Operation. This hands-on qualification has scope for slewing mobile cranes (up to 60 tonnes) and non-slewing mobile cranes (greater than 3 tonnes). The course covers: working at heights, working around electrical sources, rigging and dogging, mobile crane inspections, hazard identification and control strategies, workplace documentation, accident-emergency procedures, and mobile crane lifting operations. Enquire now for the full list of study units, mobile crane licensing outcomes, and upcoming enrolment opportunities near you.
Learn moreThe MST30222 Certificate III in Manufactured Textile Products is a trade qualification that teaches you how to sew and construct sails, PVC and other canvas products. This nationally recognised qualification is usually completed as an apprenticeship under the guidance of a qualified sailmaker. Your course begins with canvas production essentials: working safely, selecting canvas and sail materials, industrial sewing techniques, taking measurements, using sailmaking production tools, applying quality standards. You’ll then gain specialist skills in your area of employment: motor vehicle trimmings, marine covers, yacht sails, caravan frames and canopies, welding and constructing metal frames. Enquire now for the full list of entry requirements, specialisation areas, and training providers near you.
Learn moreEntry requirements
Entry requirements set by ASQA are the basic qualifications and criteria that students must meet before enrolling in a nationally recognised course.
These requirements ensure students have the skills and knowledge needed to undertake this course.
- There are no formal academic requirements
- Additional entry requirements are set by individual course providers
Career opportunities
The Advanced Diploma of Air Conditioning and Refrigeration Engineering will prepare you for the following roles.
Air Conditioning Technician
An Air Conditioning Technician repairs and maintains a range of air conditioning and refrigeration systems. You might work on large industrial equi...
Refrigeration Mechanic
A Refrigeration Mechanic installs and repairs air conditioners and refrigeration systems. You might test systems and locate faults. Refrigeration M...
HVAC Technician
A HVAC Technician performs work on a range of heating, ventilation and air conditioning systems. You might conduct regular maintenance services or...
More about Advanced Diploma of Air Conditioning and Refrigeration Engineering
The Advanced Diploma of Air Conditioning and Refrigeration Engineering is a vital qualification for those aspiring to excel in the air conditioning and refrigeration industry in the Australian Capital Territory. This course equips students with the technical expertise and practical skills required to thrive in various roles within this dynamic field. As a graduate, you will be well-prepared to embark on a successful career as an Air Conditioning Technician, HVAC Technician, or a Refrigeration Mechanic, all of which are in high demand in Canberra and surrounding regions.
This diploma covers essential skills such as system design, installation, and maintenance, which are critical for ensuring the efficiency and safety of air conditioning and refrigeration systems. By studying this course, learners will engage with topics that intertwine with related Trades courses and specialised Heating, Ventilation, and Air Conditioning qualifications. As the climate in the Australian Capital Territory can vary significantly, understanding these systems’ operational principles is crucial for effective environmental control.
The training providers offering the Advanced Diploma of Air Conditioning and Refrigeration Engineering in the ACT are committed to delivering high-quality education recognised across the industry. Graduates can expect to find numerous job opportunities in both commercial and domestic sectors. With experience, roles such as an HVAC Technician or an Refrigeration Mechanic offer pathways to career advancement, allowing for growth into supervisory or specialist positions within the field.
For those interested in pursuing this rewarding career path, the Advanced Diploma of Air Conditioning and Refrigeration Engineering is a foundational step. To learn more about the course and how it can help you enter this exciting industry, visit the course page at Courses.com.au. Equip yourself with the skills and knowledge to become an integral part of the HVAC community in the Australian Capital Territory and build a prosperous career within this essential trade.
