Course providers in Ballina
Become a licensed carpenter with the CPC30220 Certificate III in Carpentry. This nationally recognised training course is a trade qualification and part of a carpentry apprenticeship. During your studies you will learn the essentials of working on a construction worksite including critical safety, communication, and behavioural standards. You’ll then gain the technical skills you need to work in either commercial carpentry, residential carpentry, or formwork. Skills include: using carpentry tools and equipment, handling carpentry materials, setting out, installing floors, constructing wall frames, erecting roof trusses and pitched roofs, installing windows and much more. Enquire now for the list of study units, carpentry career outcomes, and upcoming enrolment dates.
Learn moreThe Professional Certificate of Competency in Heating, Ventilation and Air-Conditioning (HVAC) provides engineers and technicians with essential knowledge of HVAC systems. It covers psychrometric charts, indoor air quality, load calculations, and system design considerations. Participants will gain practical skills in maintaining and troubleshooting HVAC systems, ensuring optimal performance and efficiency. This course is suitable for professionals from various backgrounds seeking to enhance their expertise in HVAC principles and applications. Enquire now for a full list of entry requirements and available enrolment dates.
Learn moreThe UEE32220 Certificate III in Air-conditioning and Refrigeration will teach you how to repair refrigerated food storage equipment and air conditioning systems in residential buildings and commercial premises. This nationally recognised qualification includes the regulatory requirements for purchasing and handling refrigerants. The course covers: on-the-job safety when working with refrigeration equipment and electricity, problem solving along a range of electrical circuits, fabricating and assembling components, connecting refrigerant tubing and pipework, commissioning air conditioning and refrigeration systems. Enquire now for the list of entry requirements, career outcomes, and upcoming enrolment dates.
Learn moreThe SFL40115 Certificate IV in Floristry is for senior florists and team leaders who need leadership and advanced floral design skills. This nationally recognised qualification will teach you how to design and construct complex floristry products, co-ordinate floral designs for special occasions, lead work teams, order and maintain floristry stock, and provide a safe work environment. There is also scope to learn administration, eCommerce, and horticultural skills. Enquire now for the full list of study units, graduation competencies, and enrolment centres near you.
Learn moreLearn to design beautiful flower arrangements plus the essentials of floristry sales and service with the Certificate III in Floristry (SFL30115). This 6 month course can be used to support an apprenticeship in floristry or to get started in the business. It’s a nationally recognised qualification and covers: floristry tools and equipment, hand-tied and wired floristry products, flower and plant materials, design and colour fundamentals, sales and merchandising.Enquire now for a list of course dates and the next opportunities for enrolment.
Learn moreThe Certificate II in Floristry (Assistant) (SFL20115) will teach you how to create beautiful flower arrangements ready for sale. This nationally recognised qualification will get you started in a florist shop receiving, storing, and caring for floristry stock, while interacting with customers. The course will teach you how to recognise flower and plant materials, assemble different types of floristry products, and use correct tools and equipment. Enquire now for the full list of study units, graduation outcomes, and upcoming enrolment dates.
Learn moreConfidently apply for a trade apprenticeship in furniture and cabinet making when you hold the MSF20522 Certificate II in Furniture Making Pathways. This nationally recognised qualification helps you plan a career in the furnishings industry and gets you started with the skills you’ll need. Over 12 months you’ll learn how to make timber joints, simple furniture and upholstery products, prepare surfaces, and join materials. Enquire now for the list of study units, training centres, and information about how to do this training at school.
Learn moreA Certificate III in Joinery is a great way to get started in a career as a joiner. This course explores a range of specialised timber joinery skills including producing joinery components and using a range of joinery machines and equipment. You’ll learn how to create and install windows and doors, build stairways and create decorative finishes. The Certificate III in Joinery covers a range of topics relevant to timber joinery. Course delivery will vary depending on your provider, but you might cover subjects including cutting and installing glass, assembling and installing stairs and using sealant and sealant devices. Enquire now for a full list of study units, entry requirements and start dates.
Learn moreThe CPC30320 Certificate III in Concreting qualifies you for work as a professional concreter on either commercial or domestic properties. This nationally recognised training course delivers the foundational knowledge required for any career in trades (measurements, calculations, levelling, using tools, onsite safety) as well as specific concreting skills (placing, finishing, curing, and reinforcing concrete). Enquire now for the full list of study units, elective choices, and enrolment opportunities.
Learn moreThinking about a career in construction but not sure if it’s for you? The CPC20120 Certificate II in Construction will prepare you for work as a labourer on a construction site, but it’s also a great pre-apprenticeship program. Over 6-12 months of study you will learn how to safely use standard tools, take measurements, perform calculations and levelling, work at heights, and carry out basic concreting. The course also covers excavation and demolition work. Enquire now for the list of study units and enrolment opportunities near you.
Learn moreEntry requirements
Entry requirements set by ASQA are the basic qualifications and criteria that students must meet before enrolling in a nationally recognised course.
These requirements ensure students have the skills and knowledge needed to undertake this course.
- There are no formal academic requirements
- Additional entry requirements are set by individual course providers
Career opportunities
The Certificate II in Cabinet Making and Timber Technology will prepare you for the following roles.
Apprentice Cabinet Maker
An Apprentice Cabinet Maker builds and installs products such as kitchen and bathroom cabinets. You’ll work with clients to design pieces and work...
Apprentice Furniture Maker
An Apprentice Furniture Maker builds a range of furniture pieces for clients. You’ll use materials including timber and synthetic products and also...
Apprentice Joiner
An Apprentice Joiner creates timber components used for a range of purposes, including doors, window frames, staircases and other parts. You might...
More about Certificate II in Cabinet Making and Timber Technology
If you're situated in Ballina, 2478, and looking to take your first steps into the exciting world of cabinet making and timber technology, consider enrolling in the Certificate II in Cabinet Making and Timber Technology. This comprehensive course provides essential skills and knowledge that will set you up for a successful career in the trades industry. With the region's growing demand for skilled tradespeople, now is the perfect time to embark on this rewarding journey.
The Certificate II programme is closely related to various fields of study, particularly Trades courses and Carpentry. By pursuing this course, students not only gain hands-on experience but also learn about the theoretical aspects of cabinet making and timber technology. This well-rounded education prepares graduates for diverse opportunities in the local job market, connecting them with the vibrant Ballina community.
Graduates of the Certificate II course are well-equipped to pursue roles such as Apprentice Carpenter, Apprentice Joiner, Apprentice Cabinet Maker, and Apprentice Furniture Maker. These roles allow individuals to apply their newly acquired skills, gain valuable on-the-job experience, and pave the way for long-term career growth in the ever-developing trades sector.
Ballina, known for its stunning coastal scenery and vibrant economy, is an ideal location for students looking to engage in practical training. By enrolling in the Certificate II in Cabinet Making and Timber Technology, students can tap into local job opportunities, gain hands-on experience in workshops, and create connections with employers in the region. With the support of industry-recognised training providers, students can expect an enriching learning experience tailored to meet the needs of the local market.
In conclusion, the Certificate II in Cabinet Making and Timber Technology offers a promising avenue for aspiring tradespeople in Ballina. With the right training and support, graduates will not only enhance their skill set but also position themselves for a prosperous future in the industry. Don't miss out on this opportunity to kickstart your career in cabinet making and timber technology—explore the training options available and take the first step towards a fulfilling profession today!
