Course providers in Darwin
The Professional Certificate of Competency in Heating, Ventilation and Air-Conditioning (HVAC) provides engineers and technicians with essential knowledge of HVAC systems. It covers psychrometric charts, indoor air quality, load calculations, and system design considerations. Participants will gain practical skills in maintaining and troubleshooting HVAC systems, ensuring optimal performance and efficiency. This course is suitable for professionals from various backgrounds seeking to enhance their expertise in HVAC principles and applications. Enquire now for a full list of entry requirements and available enrolment dates.
Learn moreThe HLTWHS005 Conduct Manual Tasks Safely provides the skills and knowledge necessary for employees to perform safe handling practices in the healthcare industry. Poor manual handling is a common cause of injury, making it crucial for all healthcare workers to learn safe transfer techniques. This course covers recognising hazardous manual tasks, preparing for them, and completing them safely. It is applicable to all workers involved in manual handling tasks. Enquire now for a full list of entry requirements and available enrolment dates.
Learn moreThe UEE32220 Certificate III in Air-conditioning and Refrigeration will teach you how to repair refrigerated food storage equipment and air conditioning systems in residential buildings and commercial premises. This nationally recognised qualification includes the regulatory requirements for purchasing and handling refrigerants. The course covers: on-the-job safety when working with refrigeration equipment and electricity, problem solving along a range of electrical circuits, fabricating and assembling components, connecting refrigerant tubing and pipework, commissioning air conditioning and refrigeration systems. Enquire now for the list of entry requirements, career outcomes, and upcoming enrolment dates.
Learn moreThe RII30920 Certificate III in Civil Construction is a nationally recognised qualification for anyone wanting to get started in road, bridge, or tunnel construction. The course introduces you to a civil construction jobsite, teaching you the safety and environmental protocols expected of all civil construction workers. You’ll learn to read plans and jobs specs, use a range of hand and power tools, and perform accurate measurements and calculations. The qualification then allows you to specialise in any of nine areas: bituminous surfacing, bridge construction, pipe laying, road construction, road marking, tunnel construction, timber bridges, traffic management, and general operational work. Enquire now for the list of course specialisations (and their availability in your area) as well as open course dates.
Learn moreBecome a licensed glazier with the MSF30422 Certificate III in Glass and Glazing. This nationally recognised certificate qualifies you for work with either flat glass or stained glass and leadlights. The course covers: cutting glass by hand, glass cutting with machines, taking accurate measurements and calculations, communicating with supervisors and workmates, applying safe work methods, moving single sheets of glass, using computer-aided design (CAD) systems, applying patterns and designs to glass, laminating and toughening glass. Enquire now for entry requirements, glass trade outcomes, and course training providers in your area that offer this qualification.
Learn moreThe AUR20220 Certificate II in Automotive Air Conditioning Technology is the qualification you need to obtain your automotive air conditioning licence. Completed on-campus, you’ll learn how to diagnose, service, and repair air conditioning and HVAC systems. Graduate and apply for your 'AAC02 - Refrigerant handling licence - qualified persons' with the Australian Refrigeration Council. Enquire now for a list of training centres, starting dates, and elective choices.
Learn moreThe UEE20120 Certificate II in Split Air Conditioning and Heat Pump Systems will teach you how to install split system air-conditioners and heat pump systems. The course is nationally recognised and covers: risk management and safety; connecting refrigerant tubing and fittings; testing and charging refrigerant leaks; using drawings, diagrams, schedules, standards, codes and specifications. Enquire now for enrolment requirements and upcoming training dates.
Learn moreThe CPC30920 Certificate III in Scaffolding is a trade qualification delivered under the supervision of a qualified scaffolder. It’s a nationally recognised course and you’ll graduate with a construction industry White Card, working at heights permit, and a scaffolding licence. The course covers: measurements and calculations, reading plans and specifications, erecting and dismantling scaffolding. You can also choose electives in welding, business administration, dogging, and loading crane operations.
Learn moreA CPC31420 Certificate III in Construction Waterproofing will provide you with the knowledge and skills you need to become a qualified waterproofer. You’ll learn how to perform various waterproofing tasks to prevent damage from water or damp on construction sites. This course will prepare you to work on both interior and exterior areas in the residential and commercial construction industry. The CPC31420 Certificate III in Construction Waterproofing looks at a range of topics relevant to this industry. Course delivery will vary depending on your provider, but you might cover subjects including handling waterproofing materials, applying sealant, using waterproofing tools and equipment and preparing surfaces for waterproofing application. Enquire now for a full list of study units, entry requirements and start dates.
Learn moreJoin a bridge construction and maintenance crew with the RII30920 Certificate III in Civil Construction (Bridge Construction and Maintenance). This nationally recognised qualification will teach you the communication and safety essentials of a civil construction worksite, then introduce you to the required tools, measurements and calculations. You’ll also gain hands-on skills in digging, levelling, concreting, site draining and dewatering, installing pre-cast girders and parapets, installing pre-cast concrete bridge decks, and more. This course also has scope to obtain a number of WHS permits including working at heights, rigging, dogging, and scaffolding. Enquire now for enrolment opportunities and the full list of civil construction career outcomes.
Learn moreEntry requirements
Entry requirements set by ASQA are the basic qualifications and criteria that students must meet before enrolling in a nationally recognised course.
These requirements ensure students have the skills and knowledge needed to undertake this course.
- There are no formal academic requirements
- Additional entry requirements are set by individual course providers
Career opportunities
The Certificate II in Furniture Making will prepare you for the following roles.
Apprentice Joiner
An Apprentice Joiner creates timber components used for a range of purposes, including doors, window frames, staircases and other parts. You might...
Apprentice Cabinet Maker
An Apprentice Cabinet Maker builds and installs products such as kitchen and bathroom cabinets. You’ll work with clients to design pieces and work...
Apprentice Furniture Maker
An Apprentice Furniture Maker builds a range of furniture pieces for clients. You’ll use materials including timber and synthetic products and also...
More about Certificate II in Furniture Making
Enrolling in the Certificate II in Furniture Making in Darwin is an excellent step for those looking to begin a rewarding career in the furniture making industry. This certification provides essential skills and knowledge for potential professionals, equipping them to excel in various roles such as an Apprentice Joiner, Apprentice Cabinet Maker, and an Apprentice Furniture Maker. With a solid grounding in the fundamentals of furniture making, students can look forward to a range of employment opportunities across Darwin and its surrounding regions.
Pursuing a Certificate II in Furniture Making not only opens doors to specific job roles but also lays the foundation for further study in related fields, such as Carpentry and other trades courses. This course is structured to provide both practical skills and theoretical understanding, making graduates more appealing to employers in the construction and furniture sectors in Darwin, a city known for its vibrant building industry.
Students completing this qualification can explore careers as an Upholsterer, Curtain Maker, or even a Picture Framer. This diversity illustrates the various pathways available, ensuring that graduates can find a niche that suits their skills and interests. The furniture production landscape is dynamic, and the training received will harness the creativity and craftsmanship necessary for success.
Darwin is a perfect location for training in furniture making due to its growing demand for skilled tradespeople. The Certificate II in Furniture Making courses available in the region are recognised and offered by various Registered Training Organisations (RTOs) or industry-recognised institutions. This certification enhances the employability of graduates, providing them with a competitive edge in the job market.
If you are passionate about crafting quality furniture and looking to build a career in the trades, the Certificate II in Furniture Making is your first step toward achieving your professional goals. With the right training and commitment, you can soon be on your way to becoming a skilled tradesperson in the heart of Darwin, contributing to the local community while pursuing your passion.
